Making Your Own Replacement Key For Saab 93 Viggen
Saab owners who lose their keys might be concerned about the cost and inconvenience to replace it. You can save these costs by making your own key fob.
You will require a phillips screwdriver that is flathead to accomplish this. Place the screwdriver flat in the slot in the middle of the case, and then slowly open it.
Cost
Some used cars come with only one key, but most SAABs come with two keys. In this scenario, the owner must get an additional key, and this can be expensive. There are many options to cut costs in this procedure. For instance, if you just require a new key fob case you can save money by buying a used case at the dealership. But, be aware that these cases do not include the badge or emergency key and are prone to wear out quickly.
In addition to the cost of a new key, you must also pay for the installation and programming of the TWICE module. These costs can be expensive, especially if you don't have a spare.
This is why it is crucial to have at least two keys for your car. This way, if you have lost the only functioning key it won't leave you with no transportation.
It's not as difficult as it may seem to add an additional key from the Saab 9-3. The only problem is that you must connect the key to the computer in your car. This can be done through an auto dealer, however it could take a while to set up an appointment. You can find all the details you need on the internet to guide you through the procedure.
Installation
Most Saab cars built since 1995 have an immobilizer system that makes use of a key-fob to control the engine of the car. The system also controls remote and door locks for the vehicle. It is vital to have a spare key available to avoid losing the original one and causing your car to be stolen. If you lose your only Saab working key, there are many ways to replace it without paying for expensive dealer services.
First, you need to prepare the new key fob. It is done by using the flathead screwdriver for prying the case open. Just insert the screwdriver in a small hole in the middle of the case. Then gently work it. If you're having trouble, try using different angles. Once you've opened up the case, take out the electronics and place them in a brand-new fob case.
You can begin the process of programming once you have the replacement key and fob. You will be required to connect your Tech2 and follow the instructions for the NG 9-3 (with or without the key). G28 Car Keys is recommended that you get a replacement TWICE that is already connected to the correct key by using an transponder. It is possible to find this unit on the internet. But, you must be sure to use an OEM replacement.
Programming
Tech 2 Tech 2 is required to add a second key to the Saab 9-3. It also involves programming the vehicle to recognize the new key. This is more complex than simply copying the metal keys, and should be performed by a professional to avoid damaging the vehicle's electronic system. If you're thinking about adding the spare key to your car, you should try to do it as soon as you can. In the event of delay, it could result in higher costs in the future.
It is also necessary to replace either the CIM or TWICE modules. It's a process that requires mail order and cannot be do through an aftermarket supplier. Depending on the car model, the cost can be quite expensive.
The dealer will charge you the most dollar to replace the car computer, but you have another option! S.A. Locksmith & Security can re-program the EEPROM on your Saab computer and prepare the vehicle for the new key, saving you the cost of a brand new car computer! This service is quick, simple and affordable. You will save up to 50% on what dealers would charge you. This is a great solution for those who have lost their keys.
Remotes
The Saab 9-3 Viggen is one of the most original cars to wear the Saab badge. It was an Scandinavian front-drive fighter jet inspired monster that was quick and enjoyable to drive. Although plenty of other Saab models came after it, they were not as unique.
It is essential to replace your Saab 9-3's keys fob when you lose it. Saab vehicles come with an immobilizer device that requires a special key in order to start. If you have a spare, the replacement process is fairly simple. If you do not have one it can be expensive and time-consuming.
You can save money if purchase a used key fob replacement and then have it programmed locally by locksmiths. Be careful when purchasing used keys from eBay and other online stores. They might not be authentic and you may pay more in the end.
The removal of the battery and electronic components from the old key fob is an easy process that anyone can do using a small screwdriver. Be cautious not to harm the tiny electronic components in the case. Be careful not to pour liquids into the case since this could cause damage. You should also avoid buying cloned keys from aftermarket sellers, since they might not have been connected to the CIM on your car.